Product ID:HI-T 650 - HIGH TEMPERATURE DRY FILM LUBRIC
MSDS Date:05/12/1992
FSC:9150
NIIN:01-021-4854
MSDS Number: BGFCB

SANDSTROM PRODUCTS COMPANY

224 SOUTH MAIN STREET
PORT BYRON, IL 61275-9501
US

Emergency Phone: 800-424-9300

Info Phone: 309-523-2121

Cage: 34227

SANDSTROM PRODUCTS COMPANY

PORT BYRON, IL 61275 US

Telephone: 309-523-2121

Cage: 34227

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ANTIMONY TRIOXIDE (SARA III)

CAS: 1309-64-4

RTECS: CC5650000

OSHA PEL 0.5 MG/M3 (SB)

ACGIH TLV: 0.5 MG SB/M3; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

MOLYBDENUM DISULFIDE

CAS: 1317-33-5

RTECS: QA4697000

OSHA PEL 10 MG/M3 TDUST (MO)

ACGIH TLV: 10 MG/M3 (MO); 8990

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE-MODERATELY IRRITATING. SKIN-MAY
PRODUCE IRRITATION, DEFATTING & DRYING OF THE SKIN.
INHALATION-IRRITATION TO THE NOSE, THROAT, RESPIRATORY TRACT &
OTHER MUCOUS MEMBRANES. MAY BE HARMFUL OR FATAL.
INGESTION-MODERATLEY TOXIC. SEVERE LUNGDAMAGE IF ASPIRATION OCCURS.
Effects of Overexposure:CENTRAL NERVOUS SYSTEM DEPRESSION CAN BE
EVIDENCED BY HEADACHE, DIZZINESS, NAUSEA AND SYMPTOMS OF
INTOXICATION; IN EXTREME CASES, UNCONSCIOUSNESS AND DEATH MAY
OCCUR. SKIN CONTACT CAN PRODUCE DERMATIT IS.
Medical Cond Aggravated by Exposure:PREEXISTING SKIN, EYE & RESPIRATORY
DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS PRODUCT. IMPAIRED
CENTRAL NERVOUS SYSTEM FUNCTIONS FROM PREEXISTING DISORDERS MAY BE
AGGRAVATED BY EXPOSURE.

First Aid:EYE-FLUSH EYES WITH WATER 15 MIN. SKIN-REMOVE CONTAMINATED
CLOTHING/SHOES. WIPE EXCESS & FLUSH WITH WATER USING SOAP.
INHALED-REMOVE VICTIM TO FRESH AIR. PROVIDE OXYGEN IF BREATHING IS
HARD. PERFORM C PR IF VICTIM IS NOT BREATHING. INGESTED-DO NOT
INDUCE VOMITING. IF VOMITINH OCCURS NATURALLY, KEEP HEAD BELOW HIPS
TO PREVENT ASPITAION. GET IMMEDIATE MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:PMCC
Flash Point:54.0F,12.2C
Extinguishing Media:USE WATER FOG, FOAM, DRY CHEMICAL OR CARBON
DIOXIDE.
Fire Fighting Procedures:WARNING. FLAMMABLE. CLEAR FIRE AREA OF
PERSONNEL. DO NOT ENTER FIRE WITHOUT HELMET, FACE SHIELD, BUNKER
COAT, GLOVES, RUBBER BOOTS & POSITIVE PRESSURE SCBA.
Unusual Fire/Explosion Hazard:CONTAINER EXPOSED TO INTENSE HEAT FROM
FIRES SHOULD BE COOLED WITH WATER TO PREVENT RUPTURE. CONTAINER
AREAS EXPOSED TO DIRECT FLAME SHOULD BE COOLED WITH WATER

Spill Release Procedures:SMALL SPILL>>TAKE UP WITH AN ABSORBENT
MATERIAL AND PLACE IN NON-LEAKING CONTAINERS; SEAL TIGHTLY FOR
PROPER DISPOSAL.

Handling and Storage Precautions:USE WITH ADEQUATE VENTILATION. KEEP
CONTAINERS CLOSED WHEN NOT IN USE.
Other Precautions:EXTINGUISH PILOT LIGHTS, CIGARETTES & TURN OFF
SOURCES OF IGNITION UNTIL VAPORS ARE GONE. VAPOS MAY ACCUMULATE &
TRAVEL TO IGNITION SOURCES. CONTAINERS, EVEN IF EMPTY, CAN CONTAIN
EXPLOSIVE VAPORS. DO 'NT CUT, DRILL, GRIND, WELD ON CONTAINER

Respiratory Protection:AVOID PROLONGED OR REPEATED BREATHING OF
VAPORS/DUST. IF EXPOSURE EXCEEDS TLV USE A NIOSH-APPROVED
RESPIRATOR TO PREVENT OVEREXPOSURE.
Ventilation:USE VENTILATION AS REQUIRED TO CONTROL VAPOR/DUST
CONCENTRATIONS.
Protective Gloves:NONE SPECIFIED BY MANUFACTURER.
Eye Protection:WEAR GOGGLES TO PREVENT EYE CONTACT
Other Protective Equipment:EYE WASH FOUNTAIN AND SAFETY SHOWER SHOULD
BE AVALIABLE FOR USE IN EMERGENCY.
Work Hygienic Practices:WASH WITH SOAP AND WATER BEFORE EATING,
DRINKING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
CONTAINERS CAN CONTAIN HAZARDOUS PRODUCTS RESIDUES EVEN WHEN EMPTY.

HCC:F2
Vapor Density:>1 AIR=1
Evaporation Rate & Reference:<1 (ETHER=1)
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:93.33

Stability Indicator/Materials to Avoid:YES
AVOID OZIDIZING MATERIALS. AVOID STRONG ACIDS.
Stability Condition to Avoid:KEEP LIQUID AND VAPORS AWAY FROM HEAT,
SPARKS, AND FLAME.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE AND
UNIDENTIFIED ORGANIC COMPOUNDS MAY BE FORMED DURING COMBUSTION.

Waste Disposal Methods:REFER TO LATEST EPA OR STATE REGULATIONS
REGARDING PROPER DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.